Archery
Easton X10 3.2mm Tungsten Points - Precision Glue-In for Elite Accuracy
Designed solely for use with Easton’s X10 ™ 3.2mm shafts, these breakoff points ensure top level consistency, accuracy, and overall performance for the highest level of archery.
Specifications:
- Fitment: Designed specifically by Easton for X10™ 3.2mm shafts
- Construction: Tungsten
- Weight: 100, 120 grains
- Quantity: 12-pack
Easton Bow-Go Micro 3818 Bowcase: Compact Protection for Bows Up to 36"
The Bow-Go Micro delivers compact protection at a value price point. Designed to fit bows up to 36 inches in overall length, it features a main bow compartment, a zippered arrow pocket for quivers or arrow tubes, and a corner accessory pocket.
Specifications:
- ID: 36” x 16”
- OD: 38” x 18”
- Carry Method: Carry handle
- Number of Pockets: Two
- Wheels: No
- Compatible with Easton Arrow Totes
- Color: Ranger Green Topo, Mossy Oak Bottomland, Gray Topo
Easton Genesis Max 4017 Bowcase - NASP Protective Case
Specifically designed for the Genesis bows used in NASP competitions, the 4017 Genesis Max bowcase provides a protective fit for the most popular beginner and archery school platforms. The padded interior also contains an extra arrow pocket that can accommodate your arrows with or without an arrow tube. The exterior pocket is perfect for all of your shooting accessories.
Specifications:
- Construction Material: High-denier polyester with thick interior padding
- Dimensions: 40” x 17”
- Carry Method: Carry handle
- Number of Pockets: One
- Wheels: No
- Color: Blue, red, gray, Mossy Oak Bottomlands
Easton X10 3.2mm Parallel Pro Shafts - World's Finest Target Arrows
Experience the World’s Finest Arrow with the X10™ 3.2mm Parallel Pro.
The Easton X10™ is the winningest arrow in competition archery history. The new X10™ Parallel Pro 3.2mm continues that proven legacy. An introduction from Easton for 2026, the X10™ Parallel Pro 3.2 provides serious competition archers with a budget-friendly X10™ designed specifically for 50m and 70m competition.
Renowned as the arrow of choice for Olympic champions, the X10™ sets the standard for precision and quality in archery. The new Parallel Pro carries this legacy forward as a lightweight, easy-tuning 3.2mm shaft crafted with the highest tolerances and high-modulus carbon fiber. Designed for recurve, compound, target, field, and barebow disciplines, the Parallel Pro delivers unmatched accuracy and performance for serious archers worldwide.
Specifications:
- Construction: High Strength Carbon Fiber bonded to a 7075 alloy core
- Archery Style: 3D/Target
- ID: 3.2mm
- Weight Tolerance: +/- .5gr in precise weight codes
- Straightness: +/- .001”
- Quantity: 12-pack
Spine | GPI | OD | Length:
- 340 | 10 | .215” | 34”
- 380 | 9.3 | .209” | 33.75”
- 420 | 8.1 | .207” | 33.5”
- 460 | 8.5 | .203” | 33.25”
- 500 | 8.0 | .200” | 33”
- 550 | 7.6 | .197” | 32.5”
- 600 | 7.3 | .194” | 32”
- 650 | 7.0 | .191” | 31.5”
- 700 | 6.8 | .187” | 31”
- 750 | 6.5 | .186” | 30.5”
- 800 | 6.0 | .181” | 29.5”
- 900 | 5.8 | .180” | 29.5”
- 1000 | 5.5 | .177” | 29”
Recommended Components: Easton 3.2mm break-off points, 3.2mm Pin, G Nock, Pin Nock, G Pin Nock, 3.2mm Nock Collar
Easton X10 3.2mm Stainless Steel Break-Off Points - Elite Accuracy
Designed solely for use with Easton’s X10 ™ 3.2mm shafts, these breakoff points ensure top level consistency, accuracy, and overall performance for the highest level of archery.
Specifications:
- Fitment: Designed specifically by Easton for X10™ 3.2mm shafts
- Construction: Stainless steel
- Weight: 80/100 grains (#1), 100/120 grains (#1, #2, #3, #4)
- Quantity: 12-pack
Easton 5MM Axis Black 260 Spine Shafts 29.5"
Easton 5MM Axis Black Shaft 260 Spine
Cut Length 29.5 Inserts not installed.
The Easton 5mm AXIS arrow shafts are high-quality arrows perfect for hunting, 3D, and outdoor target archery. Being only 5mm in diameter, these arrows are less affected by wind drift compared to a full-size arrow, making them a great option for whatever conditions you’re shooting in. These arrows are made of high-strength nanotube N-Fused carbon composite fibers, giving them great impact resistance.
Features:
5MM micro (X) diameter
Perfect blend of deep penetration and speed
High-strength nanotube N-FUSED carbon composite fibers
Straightness: ± .003"
Includes: 5 mm X nocks (9 grains) and ST Axis HIT Inserts (16 grains)
Available Spine Sizes:
260 (11.5 gpi)
Easton Axis 5mm 300 Spine Fletched Hunting Arrows 6pk
300 Spine - 6 Pack
33 3/8" Nock groove to end of half-out. Half-out inserts installed.
Archery style: Hunting
Construction: 5MM small-diameter uniform ACU-CARBON
Inside diameter: .204" (5 mm)
Straightness: +/- .003″
Fletching: Factory helical fletched w/ 2” Blazer Vanes
Components included: 5 mm steel 8-32 Half-outs (50 grains) and 5mm X Nocks (9 grains)
Quantity: 6-pack
Available Spine Size (Weight) OD: 300 (10.7 gpi) .275"
Components Sold Separately: 5mm Brass HIT Break-off 8-32 Insert (75-50 grains), 5mm Steel 8-32 Half-out (75 grains), NEW Match Grade HIT Collar (13-21 grains)
Easton FMJ Max 5mm 400 Spine Hunting Arrow Shafts w/Halfouts
FMJ Max 5mm Shafts 400 spine
A new offering from Easton for 2025, the 5mm FMJ Max shafts bring FMJ performance into a more popular weight category. With incredible weight savings while maintaining the power and durability of Easton FMJ technology, these shafts are perfect for archery hunting and allow for increased FOC and speed when that big shot matters.
Features:
The improved and more advanced Full Metal Jacket system provides lighter weight for more versatility
OD green diamond plate shaft aesthetic
Constructed with Easton’s Five-Point straightness process and ACU-Carbon uniform spine
1.5 gpi average weight savings compared to previous 5mm FMJ model
Available in Extreme FOC/dangerous game 200 spine option
ACU-Carbon Technology:
Seamless carbon weave means consistent spine around shaft
Single die/mandrel ensures superior tolerances
Continuous feed process creates better straightness throughout production
No exterior grind allows for uniform weight
Made in the USA means shorter lead times
Specifications:
Construction: 5mm carbon core with 7075 alloy metal jacket
Archery Style: Hunting
ID: .204” (5mm)
Length: 32”
Straightness: +/- .001”
Quantity: 12-pack
Spine | Weight:
400 | 9.0 gpi
Includes: 50 gr steel halfouts (compatible with 9/32" field points), 5mm Microlite nocks
Easton Axis 5mm 260 Fletched Shafts w/Halfouts 34"
Easton Axis 5mm Shafts with Halfouts-260 (Fletched)
Shaft Model and Size: Axis 5mm Shafts
Fletching: AAE Max 2-Yellow & 1 White
Points/Inserts: Halfout Inserts Installed
Cut Length: EOS to EOS 34inches
Specifications:
Archery style: Hunting
Construction: 5MM small-diameter uniform ACU-CARBON spine
Inside diameter: .204" (5 mm)
Straightness: +/- .003″
Components Included: 5 mm steel 8-32 Half-outs (50 grains) and 5mm X Nocks (9 grains)
Quantity: 12-pack
Available Spine Size (Weight) OD:
260 (11.5 gpi) .280"
Components Sold Separately: 5mm Brass HIT Break-off 8-32 Insert (75-50 grains), 5mm Steel 8-32 Half-out (75 grains), NEW Match Grade HIT Collar (13-21 grains)
Easton 6.5mm Bowhunter Carbon Arrow Shafts 300 Spine 11PK
Easton 6.5mm Bowhunter Carbon Arrow Shafts-300- (11 Pack)
Hunting accuracy for shooter confidence is the cornerstone of Easton 6.5 arrows. The 6.5 uses proprietary Acu-Carbon™ Uniform Spine process. Acu-Carbon™ is a continuous-fed, single-die manufacturing method that results in the most reliable tolerances and eliminates the need for the spine-alignment and weight sorting. Easton’s Acu-Carbon™ production line produces the most consistent spine and weight from dozen to dozen and lot to lot—year in and year out. This benefits the bowhunter with truer flight and pinpoint accuracy in the field.
The 6.5 will also include Microlite Nocks, which are designed to move the throat of the nock closer to the back of the arrow shaft. This makes the release more forgiving and further optimizes accuracy of the shot. Microlite nocks are 38% lighter to increase arrow velocity and add front-of-center weight forwarding to improve arrow flight.
Features:
Precision machined insert has 4x larger shoulder. Strengthens the broadhead/arrow interface and boosts F.O.C.
Microlite nocks shorten the critical distance between the shaft and bowstring for improved alignment and reduced weight.
Acu-Carbon™ Uniform Spine USA Manufacturing Process for the highest level of accuracy.
Bully™ Vane Fletching—stiffer material for superior control and quiet arrow flight.
Specifications:
Construction: Acu-Carbon
Archery Style: Hunting
ID: .246”/6.5mm
Straightness: +/- .005”
Quantity: 12-pack
Spine | GPI | OD | Length:
300 | 9.5 | 0.300” | 32.25”
Includes: 6.5mm Microlite nocks (8gr), 6.5mm inserts (23gr, 5/16 field points)
UltraView UV3XL SE No Lens Target Scope Kit for Compound Bows
Recognized for superior performance, this award-winning scope system redefines its category, enhancing your effectiveness with unparalleled performance.
- The UV Cartridge system allows you to seamlessly switch between pins and lenses in seconds - without losing your marks.
- The UV Light Cartridge features 5 ultraviolet LEDs with 10 adjustable brightness settings, promising ideal pin brightness. With 6+ hours of battery life at 80% brightness and auto-off after 4 minutes of inactivity, it ensures zero power wastage, preventing unexpected dead batteries on the line. Its waterproof design lets you keep shooting despite adverse conditions.
- The unique LevelLight™ feature of the light cartridge uses a dedicated UV-LED to illuminate the scope's fluorescent level, enhancing its visibility—a key factor in making an accurate shot. Simply hold down the power button for 2 seconds to swiftly toggle on or off.
- The 5 LED’s brightly illuminate colored dots and fiber without the need for an up pin or big ugly battery packs with loose wires.
- Aircraft grade aluminum housing, anodized to a beautiful grey finish.
- Mounts onto Axcel, Shibuya, Sure-Loc, B3, CBE or any sight that accepts 10-32 threaded rods. Never run out of battery power again with over 6hrs of battery life at 80% brightness - takes two cr2025 batteries (can be found anywhere, common size). The inside diameter of the housing is 41mm. Easily swap from one lens cartridge to another depending on what discipline you are shooting. 100% Ambidextrous. Works for Right Handed and Left Handed shooters. Comes With
1 - Housing with a green level installed 1 - UV3XL™ SE Cartridge 1 - Dot Kit- with red, orange, yellow and green dots. 1 - 4' Fiber Kit- with red, blue and green 0.019” fiber 1 - 20”, 0.019” green fiber Mounting hardware Extra Batteries (2x cr2025) *Certain features of this product are patented or patent pending.
UltraView UV Slider 2 Picatinny Bow Sight
Built for the bowhunter, the Slider™ 2 is loaded with intuitive features that enhance its ease of use and give confidence in the moment-of-truth. Designed with rugged innovations unique to ULTRAVIEW, the Slider™ 2 is the pinnacle of sliding sight design.
Features:
- DualDial™: Patent Pending elevation and windage adjustment designed to work with your natural hand motion for precise adjustment and locking.
- Home Stop: An adjustable post lets you roll your sight back to “home” without needing to look at your tape.
- QuickBreak™: Easily detach the scope assembly from the rack for ease of transport and quickly reattach for a consistent return to zero for the hunt.
- TripleMark™: Calibrate each indicator to be dead on with UV’s 3-pin cartridges.
- Engraved Setup Tape: A laser engraved setup tape comes pre-installed for even faster out-of-the-box setup.
- Dual Tape: Run two tapes at once on either side of the sight for multiple arrow setups.
- Soft Case: store your entire sight for travel. Accommodates a spare viz ring, spare pin cartridge, UV Slider 2 light and USB-C charging cable (light sold separately)
Specifications:
- Mount Style: Picatinny
- Weight: 9.44oz
- Second & Third Axis: Yes
- Rapid Travel: Yes
- Micro-Adjust: Yes
- Accepts Sight Light: Yes, sold separately
- Accepts Lens: No
- Dexterity: RH and LH
- Number of Pins: V1, V3, H3, H5
- Pin Diameter:.015”
Includes: Travel case, sight tapes
UltraView UV 1K Fletched Carbon Hunting Arrows
Cut the Noise
UV 1K Arrows
From nock to point, UV 1K arrows redefine what an arrow system should be, viewing each component as an integral part of a unified system. Say goodbye to the frustration of mismatched parts and experience the unparalleled synergy of UV 1K first hand. Bowhunters deserve better.
UV 1K isn't just about making better arrows - it's about making better bowhunters. Cut the noise and embrace the future of archery with UV 1K.
Features and Technology:
- UV 1K Carbon Weave: Renowned for its superior strength-to-weight ratio, this advanced material ensures the straightest arrow with the tightest tolerances, enhancing post-shot stability. Even when shooting with an out-of-tune bow, the 1K carbon guarantees unmatched consistency, making it the best material for precision and reliability.
- 4.5mm Hybrid Diameter: Get the benefits of both a 5mm and a 4mm shaft in one. The 4.5mm shaft, combined with the ultra-high performance of 1K carbon, delivers the micro-diameter of a 4mm with the lightness of a 5mm shaft, all while maintaining ultra-durable componentry. This design optimizes grain per inch (GPI) so you no longer have to compromise on performance.
- Custom Molded UltraView Vanes: Inspired by advanced flight dynamics, UV Vanes are molded—not ribbon cut—for optimal consistency. Their contoured design increases surface area and stiffness, enhancing overall performance. These high-visibility vanes are adhered to a high-visibility wrap for quick post-shot recovery and assessment.
- Satin Ice Coating: Advanced nano ceramic arrow coating improves penetration and allows for easy removal from targets.
- UV 100 Grain Field Point: Custom field point with PVD coating and always-tight o-ring retainment system.
- UV 75 Grain Outsert: Have peace of mind on even the toughest of game. The dual-material, steel core aluminum outsert optimizes toughness and FOC.
- Victory Partnership: UV 1K is designed by UltraView and built by Victory.
- UV 1K Packaging: The sleek box holds six UV 1K arrows and allows for easy storage, stacking, travel, and wall-hanging.
Specifications:
- Construction: 1K Carbon Weave
- Archery Style: Hunting
- ID: 4.5mm
- Length: 31”
- Straightness:.001”
- Weight Tolerance: Sorted to 0.5 grains
- Fletching: Proprietary custom molded UV vanes with a 2° left helical
Spine | Weight:
- 250 | 10 gpi
- 300 | 8.7 gpi
- 350 | 8 gpi
Includes: UV field points, UV outserts, nocks, UV fletchings, UV nock bushings
Notes:
- Recommended lighted nock system is the Halo 4mm Lighted Nock (1037761)
- Fletched with Victory Black Fusion Glue
- UV 1K arrows were broadhead tested with single-bevel LH broadheads with exceptional results
UltraView UV3 SE Lens Cartridge for 1 3/8 Inch Lenses
- Additional Lens Cartridges allow for optimal reticles and aiming solutions to be available at a moments notice
- Optically centered aiming points mean every Cartridge will have the same center and point of impact in the target
- Lens Cartridge accepts: 1 3/8" size lenses
Includes:
- Cartridge (target facing)
- Two black retaining gaskets
- One White retaining gasket
UltraView UV3 Target Scope Kit Archery Sight
Aiming keeps getting easier with UltraView Archery.
- The latest advancement in sight picture simplicity is here at.019" fiber (sold separately)
- Scope body constructed of aircraft-grade aluminum and 17% lighter than UV2
- White lens gasket acts as a peep alignment ring within the UV3 Scope
- Designed to ambidextrous for use with both left and right-handed archers
- Lens Cartridge accepts: 1 3/8" size lenses (sold separately)
Includes:
- Scope Body
- Light Cartridge
- Rear Cartridge
- 2 extra batteries
- 4" fiber kit (green, Blue, Red)
- Dot Kit with multiple reticles and colors
- 20" piece of green.019" fiber
- Blue, Red, and Green level (installed)
- Mounting hardware
- World Archery Cap
UltraView UV3XL Lens Cartridge for Archery Scopes
For use with only the UV3XL - This Lens Cartridge allows you to have individual cartridges pre-setup for all your disciplines of archery; 3D, Field, Indoor, Outdoor, etc…
- Installs into the UV3XL scope
- Please note; It will not fit the UV2
- The cartridge is keyed ensuring your point of impact does not change when you swap it out
- This lens cartridge will hold both a lens and pin-ring at the same time (unlike the UV2 cartridge)
- The cartridge is constructed out of a high quality molded polymer core
- Does not come with a lens installed - must purchase a lens separately
- Accepts lenses with a diameter of 1.750"
UltraView Nock On PSE Signature Series Flat Grip
- Designed in collaboration with Archery guru John Dudley for the Nock On Nation
- Flat slightly wider pressure point improves accuracy and decrease torque at full draw especially in lower holding weight set-ups
- Higher wrist position increases stability at full draw by reducing tension in bow arm muscles
- Simple 2 screw installation mounts directly on the riser
- Ambidextrous design is compatible with both right hand and left hand bows
- Raised Nock on logos for increase confidence in consistent hand placement
- no slip surface
- For PSE Aluminum risers and Nock On Carbon Levitate bow
- Nock On Carbon Levitate
- Evo XF
- Evo EVL
- Nock On Embark
- Nock On Evo NTN
- Expedite
- Bandit NXT
- Drive NXT
- Stinger ATK
- Brute ATK
UltraView UV QuickWeight 4 oz Stainless Steel Stabilizer Weight
UV StabilizerTM's patent-pending UV QuickWeightTM system allows for quick and easy weight changes without extra hardware or long threaded rods that can be lost or are not needed.
Features:
- Weight: 4 oz.
- Outside diameter: 0.5”
- Construction: Stainless Steel
- Quantity sold: 1