Tools & Maintenance
Adhesives, Glue & Epoxy
10 products Paper Tuners
2 productsFlex Fletch Zing Superglue Remover 2 oz for Arrows
This Zing! 2oz adhesive remover removes all superglue adhesion without staining or damaging surfaces. Use it to remove commonly used fletching adhesives and wrap residue including fletching tapes, spray mounts and more! Zing! 2oz adhesive remover works by neutralizing adhesive and then quickly evaporating.
- The Strongest Cyanoacrylate Remover available for a clean fletching release.
- Pure and Uncut Remover
- Does not leave behind any residue.
- Resealable Safety cap insert (plug) that prevents leaks and evaporation.
Warning: This is a hazardous product. Please review safety guidelines on label before using this product.
Flex-Fletch Performance Promise
Made in the U.S.A.
Flex Fletch Flex-Bond Adhesive Tube for Arrows
Flex-Bond Adhesive Tube - The #1 Adhesive for Shafts & Vanes
Archery's first glue that works on all types of fletching and shafts, both flexible and durable. It is trusted and used by professionals throughout the world. It's ultra-stable formulation provides a long shelf life while keeping the tube flexible. It provides a tough and consistent bond and can be used for fletching, on nocks, on inserts, and more!
How To Use the Zing! Kling Adhesive Tube
Surfaces to be bonded should be clean and dry. Apply only enough to leave a thin film layer after compression. Press parts together and hold firmly for a few seconds. Good contact is essential and an adequate bond develops in less than three minutes.
- Optimal Set-Time: 2-3 minutes
- Full cure: 24 hours
- Product Size: 22g tube
- Also available in a pint
Flex-Fletch Performance Promise
Made in the U.S.A.
Flex Fletch Zing Kling Adhesive Tube for Arrows
Zing! Kling Adhesive Tube for Fletching
Zing! Kling Adhesive provides the fletcher with confidence that the process of fletching will be trouble-free and that the vanes will stay on. Zing! Kling is think enough to resist running and rubber-toughened to withstand high-speed abuse. It is the toughest fletching adhesive on the market!
How To Use the Zing! Kling Adhesive Tube
Surfaces to be bonded should be clean and dry. Apply only enough to leave a thin film layer after compression. Press parts together and hold firmly for a few seconds. Good contact is essential and an adequate bond develops in less than one minute. For a quicker cure time and stronger bond, use a Zing! Fletching Primer Pen or Pint beforehand.
- Optimal Set-Time: 30-60 seconds
- Full cure: 24 hours
- Full cure with Zing! Primer: 8 hours
- Product Size: 0.7oz / 20g tube
- Extra Spout / Cap: Encase mistakes happen, an extra spout / cap is included
Flex-Fletch Performance Promise
Made in the U.S.A.
Flex Fletch Flex-Bond Adhesive Pint for Arrows
Flex-Bond Adhesive Pint - Bulk Quantity
Archery's first glue that works on all types of fletching and shafts, both flexible and durable. It is trusted and used by professionals throughout the world. It's ultra-stable formulation provides a long shelf life while keeping the tube flexible. It provides a tough and consistent bond and can be used for fletching, on nocks, on inserts, and more!
How To Use the Zing! Kling Adhesive Pint
Surfaces to be bonded should be clean and dry. Apply only enough to leave a thin film layer after compression. Press parts together and hold firmly for a few seconds. Good contact is essential and an adequate bond develops in less than three minutes.
- Optimal Set-Time: 2-3 minutes
- Full cure: 24 hours
- Product Size: 1 pint (473 ml)
- Also available in a tube
Flex-Fletch Performance Promise
Made in the U.S.A.
Hamskea WayPoint Arrow Level Billet Aluminum Bow Tuning Tool
The Waypoint Arrow Level allows archers the ability to easily measure the exact vertical and horizontal position of the arrow in relation to the riser shelf for either initial bow set-up or data collection once the tune is complete.
Features:
- Construction: Billet aluminum
- Laser-engraved rulers allow for accurate measurement of center-shot and arrow height in increments of 0.050"
- Can be used to initially adjust arrow rest based on bow manufacturer recommendations
- Can be used to measure final arrow center shot and height for records
- Adjustable and lockable vertical ruler for measuring arrow height at full draw with no flex in the launcher
- Can be used to check equipment tune and easily switch between arrow diameters
- Perfect for use in pro shops, tournament trail, and hunting camp
Hamskea WayPoint Arrow Level Billet Aluminum Bow Tuning Tool
The Waypoint Arrow Level allows archers the ability to easily measure the exact vertical and horizontal position of the arrow in relation to the riser shelf for either initial bow set-up or data collection once the tune is complete.
Features:
- Construction: Billet aluminum
- Laser-engraved rulers allow for accurate measurement of center-shot and arrow height in increments of 0.050"
- Can be used to initially adjust arrow rest based on bow manufacturer recommendations
- Can be used to measure final arrow center shot and height for records
- Adjustable and lockable vertical ruler for measuring arrow height at full draw with no flex in the launcher
- Can be used to check equipment tune and easily switch between arrow diameters
- Perfect for use in pro shops, tournament trail, and hunting camp
AAE Max Adhesion Kit for Secure Arrow Vane Gluing
- Allows for the best vane and fletching adhesion for your arrows
- Works great with all AAE vanes
- Designed to give you the best of the best in fletching arrows
- Max wipes clean oils and debris from the shaft for a clean surface and a superior bond
- Max weld primer pen preps the base of the vane to allow the glue to stick better to the vane
- Max bond glue adheres quickly
AAE Max Bond Glue .7 oz for Carbon Aluminum Arrows
- Designed for use on new Plastifletch Max Hunter vanes
- Also works on Elite Plastifletch and most other vanes
- Decreases time between bond and use
- Available in .7 fl. oz. (20g) bottle